ข้อมูลจากบทคัดย่อ
ยังไม่มีสรุปภาษาไทยสำหรับระเบียนนี้
ด้านล่างเป็นบทคัดย่อต้นฉบับภาษาอังกฤษจากข้อมูลบรรณานุกรม โปรดตรวจบทความต้นฉบับก่อนอ้างอิง
We investigated eight hardened cement paste (HCP) mixtures with different water-to-cement ratios (W/C) and cement types (C3S/C2S ratio and Blaine fineness). We systematically measured pore structure evolution, C–S–H surface properties, mass and length changes, bending strength, and Young's modulus during the first drying. The strength and Young’s modulus exhibited a two-stage response, decreasing over 95%–40% relative humidity (RH) and increasing again over 40%–11% RH. Based on the Griffith–Irwin energy balance, the strength decrease in the 95%–40% RH range was accurately reproduced using only the changes in surface free energy and porosity. In contrast, in the 40%–11% RH range, C3S-rich, high–W/C systems showed pronounced hardening of the HCP skeleton, accompanied by a corresponding increase in strength. For drying shrinkage, we quantitatively demonstrated that different mechanisms dominate in the 100%–40% RH and 40%–11% RH ranges using a model that incorporates the low-density/high-density C–S–H volume fractions and the water-vapor BET specific surface area per unit HCP volume. These results provide a unified microstructural basis for understanding the coupled evolution of volume stability and mechanical properties of HCP during the first drying process.
เหตุผลที่อยู่ในฐานติดตาม
ระเบียนนี้ได้รับ Impact Signal 71/100 จากความใหม่ แหล่งเผยแพร่ ความร่วมมือ และสัญญาณในข้อมูลบรรณานุกรม คะแนนนี้ใช้จัดลำดับการติดตาม ไม่ใช่การตัดสินคุณภาพงานวิจัย
ประเด็นที่เกี่ยวข้อง: Concrete Properties and Behavior · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research
บทบาทของนักวิจัยและสถาบันไทย
Piyapong Suwanmaneechot · University of Phayao
ข้อจำกัดของข้อมูล
หน้านี้เป็นระเบียนบรรณานุกรมและข้อมูลจากบทคัดย่อ ยังไม่ใช่บทวิเคราะห์ฉบับเต็มหรือการประเมินคุณภาพงานวิจัย ควรตรวจสอบ DOI และเอกสารต้นฉบับก่อนนำไปอ้างอิง