ข้อมูลจากบทคัดย่อ
ยังไม่มีสรุปภาษาไทยสำหรับระเบียนนี้
ด้านล่างเป็นบทคัดย่อต้นฉบับภาษาอังกฤษจากข้อมูลบรรณานุกรม โปรดตรวจบทความต้นฉบับก่อนอ้างอิง
Enhanced circular tubes are widely employed in shell-and-tube heat exchangers, power-generation condensers, chemical reactors, refrigeration systems, and air-cooled heat exchangers, where improved convective performance can reduce the heat-transfer area required for a specified thermal duty. Helical screw tapes (HSTs) are passive inserts that promote sustained swirling motion and enhance convective heat transfer within such tubes. Although helical screw tapes and multiple-insert arrangements have been investigated previously, the combined thermohydraulic and second-law effects of increasing the number of co-rotating HSTs under fixed geometric ratios remain insufficiently quantified. In this investigation, turbulent airflow in a heated round tube was numerically investigated to examine the effect of tape number on heat transfer, pressure drop, thermal performance, total entropy generation (Stotal), and exergy destruction (ExD). Six HST configurations containing one to six tapes were examined over a Reynolds-number range of Re = 5000–20,000 in a circular tube with an inner diameter of DT = 31 mm, which was also adopted as the characteristic length for the Reynolds number, Nusselt number, and friction factor. The helical pitch P, screw diameter Ds, tape width W, and tape thickness t were 60 mm, 30 mm, 4.5 mm, and 0.2 mm, respectively, giving a pitch ratio of P/Ds = 2.0 and a width ratio of W/Ds = 0.15. A plain tube (PT) served as the baseline case. The results show that increasing the number of tapes intensifies swirl flow and enhances heat transfer but also leads to a continuous increase in pressure loss. For the optimum three-tape arrangement, the Nusselt number is increased by 126.0–158.8% and the thermal performance factor by 4.5–19.5% relative to the plain tube, while the total entropy generation and exergy destruction are simultaneously reduced by 7.9–61.0%. Among the configurations examined, HST-P2.0-W0.150-3, comprising three tapes at a pitch ratio of P/Ds = 2.0 and a width ratio of W/Ds = 0.15, achieved the best overall performance by delivering the highest thermal performance factor and the lowest total entropy generation and exergy destruction among the HST cases.
เหตุผลที่อยู่ในฐานติดตาม
ระเบียนนี้ได้รับ Impact Signal 70/100 จากความใหม่ แหล่งเผยแพร่ ความร่วมมือ และสัญญาณในข้อมูลบรรณานุกรม คะแนนนี้ใช้จัดลำดับการติดตาม ไม่ใช่การตัดสินคุณภาพงานวิจัย
ประเด็นที่เกี่ยวข้อง: Heat Transfer Mechanisms · Nanofluid Flow and Heat Transfer · Solar Thermal and Photovoltaic Systems
บทบาทของนักวิจัยและสถาบันไทย
Smith Eiamsa‐ard · Sathaporn Liengsirikul · S. Chokphoemphun · Varesa Chuwattanakul · Paisan Naphon · Monsak Pimsarn · Mahanakorn University of Technology · Kasetsart University · Sakon Nakhon Rajabhat University · King Mongkut's Institute of Technology Ladkrabang · Srinakharinwirot University
ข้อจำกัดของข้อมูล
หน้านี้เป็นระเบียนบรรณานุกรมและข้อมูลจากบทคัดย่อ ยังไม่ใช่บทวิเคราะห์ฉบับเต็มหรือการประเมินคุณภาพงานวิจัย ควรตรวจสอบ DOI และเอกสารต้นฉบับก่อนนำไปอ้างอิง